We model standard and custom components in 3D and issue the 2D drawings your workshop quotes from — dimensions, tolerances, materials and revisions all where they should be.
Live models — switch between shaded, wireframe and blueprint views
SolidWorks · AutoCAD · Fusion 360 · Creo
STEP · IGES · DXF · DWG · PDF · STL · Native CAD
ASME Y14.5 · ISO 1101 · ISO 2768 · DIN · IS
Six services that cover the path from an idea on paper to a released drawing pack.
Parametric solid models of parts and assemblies, built to be edited later without breaking.
Drawings a workshop can quote from and cut to, with nothing left to interpretation.
Formed parts developed with the right bend allowance, so the flat pattern comes back the size you expect.
The sequence is fixed so you always know what happens next and what you get at the end of it.
A sketch on paper, a photo with a scale next to it, an old drawing, or a full brief. Key dimensions and the mating parts are usually enough to start.
You get the deliverable list, file formats, revision count and lead time in writing before any modelling begins. No open-ended hours.
A model and draft drawing come back for comment. Changes are made against your markups until the design is signed off.
Final pack issued in the agreed formats, with a revision block that lets you track what changed and when.
A sample of recent jobs, with the problem that started them and what was handed over.
Problem
A rotating drive shaft needed a sealed housing that bolted to an existing 8-hole pattern nobody wanted to redrill.
What we did
Bore, O-ring groove and boss height were sized around the customer bolt circle and shaft tolerance, then checked for wall thickness and seal squeeze.
Problem
An actuator had to sit on an F05 valve top with enough clearance for the drive adapter and no fouling on the stem.
What we did
A machined bracket set the stack height, with the mounting face and drive coupling kept concentric within a tolerance the shop could actually hold.
Problem
A discontinued gear had to be replaced with the same centre distance and ratio, from a worn sample.
What we did
Module and tooth count were recovered by measurement, the profile rebuilt parametrically, and the keyway and hub matched to the existing shaft.
Send a sketch, a photo with dimensions, or an old print. You get a scope, a price and a lead time before any work starts.